Cable cam impossible avec Mini 2

I don’t share this point of view, on my litchi, speed cruising can be changed at any time and works great

avec 0 kmh de vitesse de croisiere il est normal que le drone ne bouge pas…

de toute évidence…

Google Traduction
you did not understand the meaning of my question.
I would like to use my Mini 2 as a cable camera.
The route being defined by the waypoints but I would like to have manual control :
-speed
-of the direction of movement (front / rear)
-of the stop en route.
In a race, there are fast runners but also very slow, others who fall to the ground.

No, you do not understand the meaning of vico’s answer.
Overriding cruising speed during flight is not yet possible for drones build for the DJI FLY app (Mini-1 and newer drones).

Google translation :
I fully understood Vico’s response: It is urgent to wait for an update for the devices using DJI Fly.
It is certainly Gil84’s comment that sows trouble.

What trouble ?
When battery level gets too low RTH will be activated.
or
If you want the drone to come home, press the RTH button or turn off the controller.

Gil84
“I don’t share this point of view, on my litchi, speed cruising can be changed at any time and works great”
Cruising speed can only be changed in Mission Settings (Button #3).
This is very different from overriding flying speed with joystick movement. This is not yet possible.

Gil84
“avec 0 kmh de vitesse de croisiere il est normal que le drone ne bouge pas…”
This is very obvious.

1 Like

Is joystick flight along a waypoint path coming soon for the Mini 2? Cable cam works on a mini2 using Maven. If I set the cruising speed to 0 on a waypoint mission then only the yaw stick operates.

J’attends moi aussi cette fonction “Cable-Cam” pour mon Mini 2. Je suis sur Android.
C’est pour bientôt ?

Avec sous-titres en français

Talk about spamming…

Fonctionnel sur DJI Fly - Android & Mini 2 ?

Oui, j’ai déjà testé avec l Mini2 et Mavic2Pro

Impossible!

Manual speed override does NOT work with DJI Fly drones.
(Mini 1, Mini SE, Mini 2, Mavic Air2, Mavic Air2s)
When cruising speed is set to zero, these drones will NOT move.

This is what you wrote in another post of yours.

“But (I think) I remenber to change the the speed of the Mini2 using the right stick. I sold the Mini2 and can’t test this.”

1 Like

Par manque de temps et surtout avec des conditions météo défavorables, je n’ai pas testé. J’ignore si les mises à jour depuis mon message de février dernier permettent l’utilisation du Mini 2 dans ces conditions (Cable-Cam). Cette fonction serait réellement une belle amélioration pour les machines utilisant DJI Fly Mini 1, Mini SE, Mini 2, Mavic Air2, Mavic Air2s
La réponse de Vico datant de février laissait penser à l’arrivée prochaine de cette fonction de “Cable-Cam”, mais où en est-on aujourd’hui ?

:pray:
look forward. Thanks Marco

Juste pour information: Les développeurs de Litchi semblent avoir oublié la demande de la fonction Cable-Cam pour le Mini 2 utilisant Android . J’ai trouvé une application qui fonctionne à merveille. : Maven Lite - For DJI Drones

1 Like

Merci Legrand, je connaissais aussi la version de cette application, mais dans la version “lite” pour Android on ne peut pas construire de waypoints… Ou est-ce que je me trompe ?

en effet, sur Android, la version de Maven “Lite” ne propose pas de missions avec waypoints. Il y a le Suivez-moi, Cable-Cam (pas mis en evidence dans la vidéo), Orbite depuis un POI. https://youtu.be/0kLAhOfA6Gw

1 Like

yet, I managed with Maven Android to use cable cam (on linear segment). with success. Thanks LEGRAND