# Too small buttons and numbers for waypoints **URL:** \ **Category:** Ideas & Suggestions\ **Created:** [August 20, 2025, 6:05am UTC](https://forum.flylitchi.com/t/too-small-buttons-and-numbers-for-waypoints/26535 "2025-08-20T06:05:44Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![HikeAndMap](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/hikeandmap/32/4410_2.png) [@HikeAndMap](https://forum.flylitchi.com/u/HikeAndMap)\ **Post date:** [August 20, 2025, 6:05am UTC](https://forum.flylitchi.com/t/too-small-buttons-and-numbers-for-waypoints/26535/1 "2025-08-20T06:05:45Z")
Let me please first describe the problem, and then the request or possible solution? ![image](https://forum.flylitchi.com/uploads/default/original/2X/b/b930f126538c43c1790082e18fce8b37f2acb68b.jpeg) I’m basically cutting a large 400x300m survey into 12 100x100m surveys because of the battery. Then I can safely conduct 1 or even 2(depending how far away I am) flights per battery. I tried to do this in a single flight plan - but this would result in many waypoints to properly follow the elevation profile on the Mavic 2 Pro. Why? Because I would need to change the batteries several times. In Pix4d this is doable because it remembers where I was left and continues than at that point. In Litchi I need to manually select that point, and this is almost not doable. ![image](https://forum.flylitchi.com/uploads/default/original/2X/a/ac207041d039b53cec28ec421a74f71a323d2263.jpeg) The colour for the way-points in sunlight during survey is very hard to see anything on the screen and then the numbers 1,2,3 etc.. of the way-points are so small - for me to view this and remember something I can barely read/see is too much room for error, so then I must split a large survey into 12 smaller ones (which takes a lot of flight planning) So my suggestions: 1. include a feature to abort, pause, call in drone, exchange battery - resume where left off 2. change the colour to something more readable even in sunlight 3. larger numbers