# Problems with Smart-DJI Fly Export **URL:** \ **Category:** General Discussion\ **Created:** [June 22, 2026, 10:15am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465 "2026-06-22T10:15:54Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 22, 2026, 10:15am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/1 "2026-06-22T10:15:54Z")
I export the flights I created with the Hub (WIN) to the RC-Pro-2 controller and overwrite the dummy flight there. Then I see two entries in DJI Fly 2: one for the dummy flight and one for a new entry with the flight’s name. Only the data for the newly loaded flight matches the dummy flight’s data. What am I doing wrong? ---
**Author:** ![Mike\_M](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/mike_m/32/4331_2.png) [@Mike\_M](https://forum.flylitchi.com/u/Mike_M)\ **Post date:** [June 22, 2026, 2:58pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/2 "2026-06-22T14:58:00Z")
Only thing I can think of is overwrite wasn’t selected. I don’t use the Litchi hub bridge because I use an iPad which is even easier so I have no way of checking. Did you follow all the instructions from Litchi ? > [@\[GUIDE\] How to use Litchi Hub with DJI Fly / SkyRover](https://forum.flylitchi.com/t/guide-how-to-use-litchi-hub-with-dji-fly-skyrover/24332): > > Many consumer DJI drones are not supported by the DJI SDK, which means they cannot be flown directly with our mobile flying app, Litchi Pilot. However, you can still use our web planner, Litchi Hub, to plan your flights and then export them to DJI Fly / SkyRover to fly them. The only requirement is that your drone supports Waypoint mode in its official app. The following drone models support this: Lito X1 Mini 5 Pro Mini 4 Pro (also has native DJI SDK support so you can fly with Litchi Pilot… ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 22, 2026, 3:28pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/3 "2026-06-22T15:28:20Z")
Thanks How does the transfer from the iPad to the RC-Pro-2 work? Via USB? What software do I need on the iPad for this? My drone: Mavic 4 Pro. ---
**Author:** ![Mike\_M](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/mike_m/32/4331_2.png) [@Mike\_M](https://forum.flylitchi.com/u/Mike_M)\ **Post date:** [June 23, 2026, 6:48pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/4 "2026-06-23T18:48:36Z")
I just mentioned I use an iPad so I have no way to check if there is an issue with your setup using the RC Pro controller. If the Litchi instructions don’t help then they will need to assist further. ---
**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\ **Post date:** [June 24, 2026, 11:20am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/5 "2026-06-24T11:20:58Z")
As @Mike_M mentionned, when you use Litchi Hub Bridge with iPhone or iPad (wether you are on Mac or Windows), everything is much easier because then Litchi Hub can write directly to the DJI Fly mission database. So you can create new flights (no need to create a dummy beforehand), rename/delete existing ones, see full mission info etc.. basically you have full functionality. That being said, android devices, RC 2, RC Pro 2 and others are also supported, but the experience is not as smooth. I have just tested again an export to RC Pro 2 and it works with no issues. Created one dummy, then exported/overwrote it via Litchi Hub Bridge and it works as one would expect, the dummy has been overwritten and that’s the only flight in the library (I did not have any others). You’ll need to give us more details to work with here, perhaps include a video of the issue. ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 24, 2026, 3:27pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/6 "2026-06-24T15:27:58Z")
Please see the pictures I made. I what it is is in the name of the pictures. Finally I have a new entry for zthe pathes with the new name, but with the same number (2) of wypoints. ![defintion Dummy](https://forum.flylitchi.com/uploads/default/original/2X/7/77a0ccd16fcdf561743ca3cb1920e6a73ed40ea3.jpeg) ![after overriting](https://forum.flylitchi.com/uploads/default/original/2X/7/7b7efa3de28c93377787b40c21655e17ae5e4847.jpeg) ![before overriting](https://forum.flylitchi.com/uploads/default/original/2X/d/d1ac0524156df80ec0492fd43a6c18c0b1f3a097.jpeg) ![Dummy Saved](https://forum.flylitchi.com/uploads/default/original/2X/1/1205d66bd80167f17b99ddc267884fec8f0b074a.jpeg) ![new path](https://forum.flylitchi.com/uploads/default/original/2X/7/795f8de2d264b122c9fd293f62d2c9fc20f0ec7b.jpeg) ![same dummy](https://forum.flylitchi.com/uploads/default/original/2X/3/34ca74c533eeb50a7ce11e61e345540c067e3b24.png) ![saving as](https://forum.flylitchi.com/uploads/default/original/2X/f/f852b62a271a15b197180f67f0272b595c630a9a.jpeg) ---
**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\ **Post date:** [June 24, 2026, 5:16pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/7 "2026-06-24T17:16:19Z")
Do you have cloud sync enabled in DJI Fly? Try with it off, then delete Dummy. Perhaps cloud sync is the reason why Dummy reappears, as it may be syncing from another device? ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 24, 2026, 7:31pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/8 "2026-06-24T19:31:31Z")
How I can disable the cloud synch? ---
**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\ **Post date:** [June 24, 2026, 7:50pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/9 "2026-06-24T19:50:37Z")
DJI Fly → Profile → Settings → Sync Flight Data → Disable ‘Auto Sync Flight Task’ Do that on all your devices that use DJI Fly. ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 25, 2026, 9:19am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/10 "2026-06-25T09:19:29Z")
I did it. And I deleted all the datas from RC-Pro-2 cache. The same error. Whe I read back the overwritten path to flight hub I see dummy’s data, but the name of the entry has changed to the new path. Very crazy ---
**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\ **Post date:** [June 25, 2026, 10:36am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/11 "2026-06-25T10:36:33Z")
Try the below: First delete all missions in DJI Fly. Then connect your RC Pro 2 to windows, open file explorer on your PC, and navigate to RC Pro 2\Android\data\dji.go.v5\files Delete the entire ‘waypoint’ folder Then follow the guide at [[GUIDE] How to use Litchi Hub with DJI Fly / SkyRover](https://forum.flylitchi.com/t/how-to-use-litchi-hub-with-dji-fly-for-drones-with-no-sdk-support/24332) Should work without any issues ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 25, 2026, 11:37am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/12 "2026-06-25T11:37:31Z")
1. I did all the stuff, the I overwrited the dummy flight 2. Now I see only the Dummy flight in DYI app on the RC-Pro-2 3. The I save the Dummy flight as “Ascona” and now I see the dummy flight and the new flight. OK. 4. I tried with a second flight. Now I see twice the flight “Ascona” and once the dummy. 5. Do I have to define a new dummy for a second flight ---
**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\ **Post date:** [June 25, 2026, 11:55am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/13 "2026-06-25T11:55:49Z")
It sounds like you are using “Save As” in DJI Fly. “Save As” will create a duplicate, that’s normal. You should have the option to just save which does not create a duplicate. Create a new dummy for each flight you want to export ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 25, 2026, 12:16pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/14 "2026-06-25T12:16:11Z")
Whe I save (without as) then I save the dummy flight and not the exported new one. ---
**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\ **Post date:** [June 25, 2026, 12:35pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/15 "2026-06-25T12:35:49Z")
Did you try to export to an iphone or other android device to see if it’s an issue specific to your RC Pro 2? We don’t have any duplicate issue with any device so not sure what the issue is here - also nobody else has reported this issue before ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 25, 2026, 2:39pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/16 "2026-06-25T14:39:38Z")
I am not able to define a dummy on my other android device, because I got th error “Device ist not kompatibel with th RC”: Any idea ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 25, 2026, 2:51pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/17 "2026-06-25T14:51:07Z")
I tried it with a IPAD-Mini. The same story as on the origianl RC controller. I have experiences with other apps, because the language ist set to German. Possible? ---
**Author:** ![wesbarris](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/wesbarris/32/1817_2.png) [@wesbarris](https://forum.flylitchi.com/u/wesbarris)\ **Post date:** [June 25, 2026, 11:46pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/18 "2026-06-25T23:46:21Z")
Perhaps the confusion is occurring because when Litchi Hub Bridge overwrites the dummy mission, it cannot change the name of the dummy mission on the RC Pro 2. This is normal. You have to name the mission manually on the RC Pro 2. Also, don’t use “Save as”. That will create an additional mission. When you create a dummy mission on the RC Pro 2, don’t use the name “dummy”. Instead, name the dummy mission using a name you will want to use for the newly imported mission. Once transferred, there is no need to save the mission again on the RC Pro 2. The only reason to “Save” the mission after it has been transferred to the RC Pro 2, is to change the thumbnail image of the mission. ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 26, 2026, 8:15am UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/19 "2026-06-26T08:15:17Z")
GREAT!!! and thank’s a lot. It’s **working** **very** **well**. I will now copy a lot missions to the RC Pro 2. Best regards Thomy ---
**Author:** ![thomy](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/t/ecccb3/32.png) [@thomy](https://forum.flylitchi.com/u/thomy)\ **Post date:** [June 26, 2026, 3:45pm UTC](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465/20 "2026-06-26T15:45:49Z")
Other question: It’s working over the WLAN (how), or only with a USB-connection [Next page](https://forum.flylitchi.com/t/problems-with-smart-dji-fly-export/28465.md?page=2)