# POI points, and its real heights, which ones?

**URL:** <https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418>\
**Category:** General Discussion\
**Tags:** waypoint, litchi-hub\
**Created:** [August 3, 2022, 8:59am UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418 "2022-08-03T08:59:07Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![capripiu](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/capripiu/32/1139_2.png) [@capripiu](https://forum.flylitchi.com/u/capripiu)\
**Post date:** [August 3, 2022, 8:59am UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/1 "2022-08-03T08:59:08Z")

</div>

Good morning everyone. Surely this topic has already been addressed, but believe me, I find nothing and therefore I ask for help.  
When you insert a POI, for example on the roof of a building or a tower, what height does the POI read, which one from the ground or where I put it from? Did I express myself well? If I put a POi on the roof of a building 20 meters high and I want the camera to frame more or less in the middle of the building, what height should I put? negative or positive with respect to the ground? and then, do I have to activate the “above ground” box? A thousand thanks. Of course this also applies to wypoints and that is where does the measurement start?

---

<div class="post-metadata">

**Author:** ![TriBar](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/tribar/32/99_2.png) [@TriBar](https://forum.flylitchi.com/u/TriBar)\
**Post date:** [August 3, 2022, 9:17am UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/2 "2022-08-03T09:17:02Z")

</div>

ALL heights are relative to the take-off point.

All heights above grondlevel are relative to the groundlevel at take-off point.

---

<div class="post-metadata">

**Author:** ![capripiu](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/capripiu/32/1139_2.png) [@capripiu](https://forum.flylitchi.com/u/capripiu)\
**Post date:** [August 3, 2022, 9:38am UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/3 "2022-08-03T09:38:36Z")

</div>

Hello TriBar and thanks for the prompt reply and sorry if maybe I have been repetitive with my question. So, I think I understand what you mean, but I have some doubts. You said that each height, both of Poi and Wypoint, refers to the height of the take-off point (first of all I intend to do the mission from a pc and then save it) when I go to insert a POI on a building or bridge, as I do I know from 2km away that building how many meters it is with respect to the take-off point? Or maybe I got it wrong?  
Giuseppe

---

<div class="post-metadata">

**Author:** ![TriBar](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/tribar/32/99_2.png) [@TriBar](https://forum.flylitchi.com/u/TriBar)\
**Post date:** [August 3, 2022, 10:10am UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/4 "2022-08-03T10:10:24Z")

</div>

In the Mission Hub:  
Place Waypoint-1 at/near your take-off point (This is VERY important).  
Place a POI at your desired location, set it’s altitude to the height of the building/bridge and check the ‘Above Ground’ box.

In the example below the “top of the building/bridge” is 83.8m above the take-off point.

Would this POI be a waypoint, the drone would climb to this altitude.

 ![Example with POI](https://forum.flylitchi.com/uploads/default/original/2X/2/2e1c352ed83d30481782682241c94d1ed52a0766.jpeg)

---

<div class="post-metadata">

**Author:** ![capripiu](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/capripiu/32/1139_2.png) [@capripiu](https://forum.flylitchi.com/u/capripiu)\
**Post date:** [August 3, 2022, 1:20pm UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/5 "2022-08-03T13:20:45Z")

</div>

ah here, now everything is clear to me. Thanks TriBar.  
You must know that I am an old lychee customer and I am in love with it for its potential, in fact I have 3 licenses for the various platforms, ios android and smart controller, but since my work leads me to always stay away from home, sometimes I forget the various features and settings.  
Giuseppe

---

<div class="post-metadata">

**Author:** ![capripiu](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/capripiu/32/1139_2.png) [@capripiu](https://forum.flylitchi.com/u/capripiu)\
**Post date:** [August 3, 2022, 1:27pm UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/6 "2022-08-03T13:27:43Z")

</div>

So when I go to place the POI on the building, he always reads the height from the ground and not from the roof where I placed it? this was my doubt and that is, if the POI read the Zero point from the roof of the building / bridge or from the ground. If, on the other hand, I wanted to frame the camera at half height of the building / bridge, I would have to enter 10 meters, right?

---

<div class="post-metadata">

**Author:** ![TriBar](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/tribar/32/99_2.png) [@TriBar](https://forum.flylitchi.com/u/TriBar)\
**Post date:** [August 3, 2022, 2:11pm UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/7 "2022-08-03T14:11:58Z")

</div>

The Online Elevation Data Litchi uses are ground elevations.

 ![Mission Settings](https://forum.flylitchi.com/uploads/default/original/1X/1494ff777be8e27b4e8e759f91556d99ba3e6a40.jpeg)

---

<div class="post-metadata">

**Author:** ![capripiu](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/capripiu/32/1139_2.png) [@capripiu](https://forum.flylitchi.com/u/capripiu)\
**Post date:** [August 3, 2022, 2:17pm UTC](https://forum.flylitchi.com/t/poi-points-and-its-real-heights-which-ones/5418/8 "2022-08-03T14:17:06Z")

</div>

Thank you veri much.  
Giuseppe
