# Error in Litchi Hub when exporting flight plans to DJI Fly

**URL:** <https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181>\
**Category:** Beta Feedback\
**Tags:** mini-5-pro, waypoint, litchi-hub\
**Created:** [April 17, 2026, 6:52pm UTC](https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181 "2026-04-17T18:52:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Suporte\_T2R](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/s/a88e57/32.png) [@Suporte\_T2R](https://forum.flylitchi.com/u/Suporte_T2R)\
**Post date:** [April 17, 2026, 6:52pm UTC](https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181/1 "2026-04-17T18:52:45Z")

</div>

When creating a flight plan and exporting it to DJI Fly, an issue occurs depending on the selected Path Mode.

If the Path Mode is set to **“Straight”** , the exported flight plan contains multiple errors in DJI Fly and does not behave as expected.  
The export only works correctly when the Path Mode is set to **“Smooth Curves.”**

**Steps to Reproduce:**

1. Create a flight plan in Litchi Hub

2. Set Path Mode to **Straight**

3. Export the flight plan to DJI Fly

4. Open the plan in DJI Fly

**Expected Behavior:**  
The flight plan should be exported correctly and function as intended in DJI Fly, regardless of the selected Path Mode.

**Actual Behavior:**  
When using **Straight** Path Mode, the exported plan presents multiple errors and does not work properly.

 ![WhatsApp Image 2026-04-17 at 10.16.50](https://forum.flylitchi.com/uploads/default/original/2X/4/4f85e7d9965a48f3a07b11c7d9773ac3caa6057e.jpeg)

When using **Smooth Curves** , the export works as expected.

**Additional Notes:**  
The issue appears to be specifically related to how the Straight Path Mode is interpreted during export.

---

<div class="post-metadata">

**Author:** ![wesbarris](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/wesbarris/32/1817_2.png) [@wesbarris](https://forum.flylitchi.com/u/wesbarris)\
**Post date:** [April 17, 2026, 7:42pm UTC](https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181/2 "2026-04-17T19:42:31Z")

</div>

I have seen this reported by others. However, from what I’ve read, only the display of the mission is affected. The mission itself executes properly. When you say “multiple errors” are you referring to the display of the mission or actual error messages?

I have flown a lot of straight line missions using a Mini 5 Pro. In my flights, I have not experienced this behavior. Without being able to reproduce it, it is difficult to know exactly what causes it.

---

<div class="post-metadata">

**Author:** ![Matthew\_Jensen](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/m/c68b51/32.png) [@Matthew\_Jensen](https://forum.flylitchi.com/u/Matthew_Jensen)\
**Post date:** [April 19, 2026, 5:08am UTC](https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181/3 "2026-04-19T05:08:09Z")

</div>

I’m having the same issue. A straight line mission is producing waypoints all over the place. I haven’t tried flying this yet but it doesn’t look promising. I’ve attached a screenshot from the controller and my hub setup and mission map area.

Path mode: Straight

Heading mode: Follow Path

Gimbal Pitch Mode: Manual

Photo Capture Mode: Interval

 ![Screenshot_20260418-215946](https://forum.flylitchi.com/uploads/default/original/2X/5/52434241690a13a0612411ee165f07ef961bc1ca.jpeg)

---

<div class="post-metadata">

**Author:** ![vico](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/vico/32/24_2.png) [@vico](https://forum.flylitchi.com/u/vico)\
**Post date:** [April 19, 2026, 1:39pm UTC](https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181/4 "2026-04-19T13:39:02Z")

</div>

Please share the Litchi flight so we can take a look: [[GUIDE] How to Share a Flight or Folder](https://forum.flylitchi.com/t/guide-how-to-share-a-flight-or-folder/27622)

---

<div class="post-metadata">

**Author:** ![Matthew\_Jensen](https://forum.flylitchi.com/letter_avatar_proxy/v4/letter/m/c68b51/32.png) [@Matthew\_Jensen](https://forum.flylitchi.com/u/Matthew_Jensen)\
**Post date:** [April 21, 2026, 5:29am UTC](https://forum.flylitchi.com/t/error-in-litchi-hub-when-exporting-flight-plans-to-dji-fly/28181/5 "2026-04-21T05:29:35Z")

</div>

So these actually flew as shown on Litchi Hub, however, the number of waypoints led to several stalls. My second mission over the same area using a different grid direction stalled out so bad I had to abort. Is there a way to reduce the number of waypoints in a mission? Ideally I don’t want/need all the waypoints between directional changes on straight leg grids for mapping.
