# Camera panning problem

**URL:** <https://forum.flylitchi.com/t/camera-panning-problem/28038>\
**Category:** General Discussion\
**Created:** [March 19, 2026, 6:51am UTC](https://forum.flylitchi.com/t/camera-panning-problem/28038 "2026-03-19T06:51:44Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![wesbarris](https://forum.flylitchi.com/user_avatar/forum.flylitchi.com/wesbarris/32/1817_2.png) [@wesbarris](https://forum.flylitchi.com/u/wesbarris)\
**Post date:** [March 19, 2026, 2:27pm UTC](https://forum.flylitchi.com/t/camera-panning-problem/28038/9 "2026-03-19T14:27:00Z")

</div>

> [@toni1](#):
>
> Well, there’s nothing wrong with the signal. It’s basically full signal.

You are probably saying this because the little signal icon on the display shows full bars. As I mentioned in my previous post, the issue is the result of latency of the signal in Virtual Stick drones. Unlike drones with native waypoints (drones that allow the entire mission to be loaded into the drone), VSC drones require flight commands and positional feedback be continuously transmitted between the drone and controller as the flight progresses. The slightest signal latency is observed as un-smooth movements in the drone.

This video describes the issue and remedies:

> [@Improve flights for drones which use Virtual Stick](https://forum.flylitchi.com/t/improve-flights-for-drones-which-use-virtual-stick/14428):
>
> No, the bad flying which virtual stick plagues us with for the “dji Fly” drones compatible with Litchi cannot be completely rectified… But it can be mitigated. I made a video about it, have a look and see what you make of it. [[Problem with waypoints: Improving waypoints footage with your (dji) drone] ](https://www.youtube.com/watch?v=hS90n21pZTs)

---

_[View the full topic](https://forum.flylitchi.com/t/camera-panning-problem/28038)._